124" Super Sidewinder™ Plus for Evolution ® Models
The S&S 124" Super Sidewinder ™ Plus is the cul-mination of years of engine building expertise. It will bolt right into a stock height Evolution ® frame but with 130hp on tap it is definitely not for the meek! The 124" is available with natural, black or polished finishes, and all have the ven-erable S&S Super G model carburetor and the features listed below:

Features include:

• Forged pistons
• 41/8"-bore with 45/8"-stroke
• Increased cooling fin area
• Special S&S HVHP oil pump
• Piston cooling oiling jets
• S&S compression releases
• S&S chrome-plated, die-cast rocker covers
• S&S forged roller rocker arms
• S&S billet tappet guides and cam gear cover
• Over 130hp and 130 ft-lbs. of torque!
• Assembled engines include a certificate of authenticity.

113" Super Sidewinder™ for Evolution ® Models
The 113" has proven itself over the last five years as being both powerful and reliable.

Shorter than stock by about .050" it will easily fit into any standard height Evolution ® frame, but the difference will be anything but stan-dard! With over 110 HP the 113" is a real powerhouse and is loaded with time-proven, high-performance features. The 113" is avail-able with natural, black or polished finishes and all have the venerable S&S Super G model carburetor and the features listed below:

Features include:

• 4"-bore with 41/2"-stroke
• Increased cooling fin area
• Special S&S HVHP oil pump
• Piston cooling oiling jets
• S&S compression releases
• S&S chrome-plated, die-cast rocker covers
• S&S forged roller rocker arms
• S&S billet tappet guides and cam gear cover
• Over 110hp and 120 ft-lbs. of torque!
• Assembled engines include a certificate of authenticity

96" Super Stock™ for Evolution ® Models
Want reliable power without spending a for-tune? Look no further that the venerable S&S 96" Super Stock ™! Recently updated with the new S&S ‘585’ cam, the already legendary relia-bility and performance of the S&S 96" is now even better. The 96" is available with natural or black finishes, and each has the venerable S&S Super E model carburetor and the features listed below:

Features include:

• 35/8"-bore with 45/8"-stroke
• Increased cooling fin area
• S&S chrome-plated, die-cast rocker covers
• S&S forged roller rocker arms
• S&S billet tappet guides and cam gear cover
• Over 95hp and 100 ft-lbs. of torque!
• Assembled engines include certificate
  of authenticity

Updated April 3, 2005 10:39 PM